PCB Fabrication RFQ

PCB Fabrication with File and DFM Review

Upload Gerber, drill and fabrication notes. Informic reviews board type, stack-up, material, copper, finish, impedance and special-process requirements before quote release.

Filescapability review
HDIimpedance review
PCB+PCBAhandoff ready
QCtest and inspection

Send PCB Fabrication Files

Send board files and get capability fit, material, finish, lead time and DFM questions in one reply.

  • Gerber / drill / drawing
  • Layer count, stack-up and board thickness
  • Rigid, flex, HDI or PCB+PCBA
Upload Gerber Package
Ask on WhatsApp

PCB fabrication process and bare boards for manufacturing quote

PCB Capability Buyers Can Check Fast

A professional PCB landing page should make layer count, board type, materials, finishes and test path visible before the buyer sends files.

File-based capability review

Prototype and production PCB requests can start from simple boards and move into high-layer stack-ups.

Advanced board families

Rigid, flex, rigid-flex, HDI, heavy copper, metal-core and RF/high-frequency needs are separated early.

DFM and test path

Stack-up, impedance, material, finish, panelization and e-test assumptions are clarified before release.

Stack-upreviewed by file
Rigid / flexrigid-flex path
HDIblind/buried via review
Impedancecontrolled stack-up

Know What Can Be Built Before PO Release

The quote is stronger when board assumptions are clear before production starts.

  • Layer count, board thickness and stack-up target reviewed.
  • Board type confirmed: rigid, flex, rigid-flex, HDI, heavy copper, metal-core or RF/high-frequency.
  • Material, thickness, copper weight, solder mask and surface finish checked.
  • Controlled impedance, via-in-pad, blind/buried vias and panelization questions surfaced.
  • Visual inspection, flying probe/e-test, impedance test or microsection requirements clarified when needed.
Real unassembled PCB array for fabrication quote review
PCB trace and pad detail for DFM and stack-up review

PCB Board Types We Can Quote

Send the Gerber package and fabrication notes. We identify the board family, manufacturability questions and quote route before production.

Rigid and multilayer PCB samples for fabrication quote review

Rigid and multilayer PCB

Standard FR-4 and high-layer stack-ups where thickness, copper weight, mask, finish and e-test need to be clear before quote.

HDI controlled impedance PCB sample with fine-pitch BGA routing and test coupon

HDI and controlled-impedance boards

High-speed, fine-pitch and dense routing projects need stack-up, impedance, via structure and inspection questions visible early.

Flex and rigid-flex PCB sample with amber polyimide flex circuits and rigid sections

Flex and rigid-flex PCB

Flexible, rigid-flex and connector-reduction projects need bend, coverlay, stiffener, material and test assumptions reviewed by file.

Heavy copper power PCB sample with wide copper pours and high-current plated holes

Heavy copper and power boards

Power and current-handling boards need copper weight, hole plating, thermal behavior and finish requirements checked before production.

Metal-core LED PCB sample with white solder mask aluminum base and thermal pads

Metal-core and LED boards

Thermal boards need aluminum or copper-base assumptions, solder mask, finish, isolation and assembly handoff details separated.

RF high-frequency PCB sample with controlled impedance traces and RF filter geometry

RF and high-frequency material path

RF, PTFE/Rogers-type and impedance-sensitive boards should be quoted with material, stack-up and test expectations visible.

PCB Capability Snapshot

Layer count Layer count and stack-up are confirmed after file review for rigid and multilayer PCB projects.
Board types Rigid PCB, flex PCB, rigid-flex, HDI, aluminum/metal-core, heavy copper and RF/high-frequency routes by project review.
Materials FR-4, high-Tg, halogen-free, polyimide flex, aluminum/copper base and Rogers/PTFE-type materials when specified.
Surface finishes HASL lead-free, ENIG, OSP, immersion tin/silver and hard gold when required by contacts or reliability needs.
DFM / test Gerber/drill review, visual inspection, flying probe or e-test, impedance coupon/TDR and microsection requirements when specified.

PCB RFQ File Checklist

  • Gerber, drill, board outline and fabrication drawing.
  • Layer count, board thickness and stack-up notes if available.
  • Board type: rigid, flex, rigid-flex, HDI, heavy copper, metal-core or RF/high-frequency.
  • Material, thickness, copper weight, solder mask, silkscreen and surface finish.
  • Controlled impedance, via-in-pad, blind/buried vias, panelization and test requirements.

What Makes the PCB Quote Useful

A useful quote makes the manufacturing route visible enough for purchasing and engineering to approve the next step.

Files checked as a setCopper, solder mask, silkscreen, drill, outline and drawing data are reviewed together.

Capability fit visibleLayer count, board type, material, copper, impedance and finish are tied to a practical production route.

DFM risk notesTrace, spacing, hole tolerance, via structure, panelization and special process risks are marked before release.

Next step is clearThe reply separates what is quote-ready, what needs engineering confirmation and what can move to PCBA review.

PCB Applications We Support

Different applications need different material, stack-up, finish, inspection and documentation choices.

Computing and networking hardware for PCB fabrication

Computing and networking boardsControl, power and interface boards where stack-up and impedance requirements need early review.
Industrial control modules and wiring for control PCB fabrication

Industrial control PCBsLong-lifecycle controller, PLC, power supply, sensor and repair boards with repeatability requirements.
Automotive lighting application for vehicle electronics PCB fabrication

Automotive electronics PCBsLighting, control, connector and power boards where material, finish and documentation expectations matter.
Electrical control display hardware for power and LED PCB applications

Power, LED and metal-core boardsThermal, copper weight, aluminum base, finish and insulation questions called out during quote review.
Telecommunications tower for communication and RF PCB applications

Communication and RF boardsControlled impedance, RF material, via structure and finish details surfaced before production.
Medical device hardware for instrumentation PCB fabrication

Medical and instrumentation boardsPrototype and production boards where inspection and repeatability outrank the cheapest line.
Layer count by reviewRigid PCBFlex / rigid-flexHDIControlled impedanceRF / high-frequencyMetal-coreHeavy copperENIG / OSPE-test

Why Buyers Quote PCB with Informic

Useful when the board may later connect to BOM sourcing, PCBA assembly or high-reliability delivery requirements.

Capability before price

The page names board types, materials, finishes and test requirements before asking for files.

DFM language

Impedance, via structure, copper, finish and panelization show the page is for real engineering buyers.

Clear next step

Buyers can send project notes immediately or upload the full Gerber package.

What the PCB Quote Should Confirm

Capability is confirmed from the file package and manufacturing requirements, not from a broad layer-count promise.

File set reviewed togetherGerber, drill, outline, fabrication drawing and stack-up notes are checked as one package.
Capability fitBoard type, material, thickness, copper, finish, via structure and impedance requirements are matched to a quote route.
DFM questions surfacedMissing or conflicting details are returned before the buyer releases the order.
Test scope statedElectrical and special inspection requirements are listed only when specified and accepted for the project.
PCB test points and pads for fabrication inspection and DFM review

Send Gerbers with the Board Type

Tell us the layer count, board family and special process needs. The quote can then answer capability fit instead of just returning a price.

  • Upload Gerbers, drill files and fabrication drawing if available.
  • Add layer count, board thickness, copper weight and surface finish.
  • Flag flex, rigid-flex, HDI, controlled impedance, heavy copper, metal-core or RF material needs.
Upload Gerber Package
Ask on WhatsApp

Related Quote Paths

Use the page that matches your files

Electronic componentsUse this path for exact MPN, shortage, packaging and traceability review.
Turnkey PCBAUse this path when the bare board will move directly into sourcing and assembly.

Use the Complete PCB Quote Checklist

The PCB fabrication quote checklist expands the file list into a buyer-ready release covering Gerber and drill data, stack-up, material, copper, finish, impedance, panelization, electrical test and comparable quote terms.

Buyer Questions Before Sending RFQ

What PCB layer count can you support?

Informic reviews the requested layer count against Gerber data, stack-up, material, copper weight and special-process requirements before confirming a production route.

What files do I need for a PCB quote?

Gerber and drill files are the minimum. A fabrication drawing, stack-up, impedance notes and delivery country make the quote more accurate.

Can you review DFM before quoting?

Yes. Informic can flag unclear or missing manufacturing details so the buyer can correct them before production.

Can PCB fabrication connect to PCBA assembly?

Yes. If assembly is planned, the PCB quote can be reviewed together with BOM, CPL and assembly drawings.

Do you support advanced PCB types?

Yes. Rigid, flex, rigid-flex, HDI, heavy copper, metal-core and RF/high-frequency projects can be reviewed by file and requirement.

Upload the PCB fabrication package

A useful quote needs the board files and the manufacturing details that control capability, cost and test scope.

  • Gerber, drill and fabrication drawing
  • Layer count, material, copper, finish and quantity
  • Impedance, panelization, test and delivery country
Upload Gerber Package
Ask on WhatsApp

WhatsApp Sales

Send the part number, BOM line, Gerber question or build blocker. Add quantity and delivery country so the first reply is useful.

Continue to WhatsApp
Close



Translate »

Get Component Availability Updates

Receive periodic availability notes, BOM sourcing guidance and supply-chain updates.

  • HQ: 1006A, Block A, Electronic Technology Building, Huaqiang North Road, Futian District, Shenzhen City, Guangdong Province, China
  • Mon-Sat 9 am-7 pm